RCI-2950 FL3 10.695 Mhz Crystal
What are the symptoms of a bad side band filter? FL3 10.695 Mhz Crystal the Main PCB is a EPT295013Z this radio has had an alignment.. What's going on is if I tap on it I can here a ping through the...
View ArticlePALOMAR ELITE 500 BASE AMPLIFIER
The hi med low power selector switch works. The preamp works. All lights that show operating positions (amp, power supply, preamp) work. The fan was replaced with the exact one that originally came in...
View Article300 a TUBE SWAP
My Palomar 300a has two 6kd6's driving four 6lf6's. I just got hold of six nos 6kd6's. Is swapping the four 6lf6's out for the four 6kd6 finals okay? If so is it a swap that consists of just removing...
View ArticleCB BANDPASS Filter?
Is there a company that makes a CB band-pass filter? Not talking about a Low Pass filter; but a true band-pass filter? Like to get one if anyone knows of a company that sells one - or even looking for...
View ArticleTHE NEW MAGNUM ONE
(this is the first review I've seen on the new Magnum One export. - 399) THE NEW MAGNUM ONE Well it finally arrived and has been bouncing around the desk for some time on 10m only mode cos I don’t have...
View Articlegalaxy 93t 10meter for sale or trade
i have a galaxy 93t for sale or trade for a dx959 this radio is in good shape and 100% working
View ArticleWanted: Imax 2000
looking for a Imax 2000, used but in good shape, no stress cracks or dry fiberglass, please. Hoping to get good price or part trade for a Cobra 138XLR and possibly more. thanks
View Article6m Radio Fun
http://www.nytimes.com/2016/08/11/science/perseid-meteor-shower-2016.html?_r=0 http://www.astrosurf.com/luxorion/qsl-meteor-scatter.htm This shower should produce some interesting contacts via 6m and...
View ArticleMax2000 cap in center section
I recently checked the continuity of the center section of this antenna and it read infinite resistance. That leads me to believe it's a capacitor and not something to keep the wire inside from banging...
View ArticleShakespeare Pogo Stick 10 Meter Antenna
Anyone have any paperwork on this antenna? Wanted to know how many watts it will handle. I dont see much on the web about them.
View ArticleAntenna switches
i was wondering on some you have 1 from radio and 2 3 4 ect out of the switch to antenna. Can these be reversed to do 2 3 4 ect radios input to 1 antenna? Curious was looking at some deltas
View ArticleTram 1499 base antenna
Does anybody know anything about the tram 1499 base antenna have a height limit where I live
View ArticleVilnord Simon, North Miami, FL
The Enforcement Bureau proposes a penalty of $15,000 against Vilnord Simon for operating an unlicensed radio station on 103.1 MHz in North Miami, Florida Continue reading...
View ArticleYaesu FT 840 + Extras
I have a pristine FT 840, Autek Research QF 1A SSB filter. along with an MD-1 and LP 100A Digital Vector Wattmeter for sale. Since it is just sitting here collecting dust, someone might as well get...
View Article38 LSB "Day after Day after Day"..biggest loser on the air.
Someone has finally booted Uncle Fester Bester for the title of biggest Douche on the CB. The winner - the loser who everyday gets on the radio to say "Day after day after day its the same thing,...
View ArticleSuper Antennas YP-3 Portable Multi-Band Yagi Review
I recently purchased a Super Antenna YP-3 portable yagi antenna, so of course I'll write about it over the next several months to give it a good review. This yagi is a 3 element antenna that assembles...
View ArticleGALAXY 979 INSTALLING ECHO BOARD
could some body explain how to install echo board. the board is a BB-2 board. i'm going to install the knob on the side of radio. where can i found 9 volts to hook red wire to. does the red and white...
View Articlegalaxy dx 99v2 tuning pots?????
So there is no info on where the different pots are to turn up or down am power, sideband power, alc and so on for the relatively new galaxy dx 99v2. There is info for the discontinued 99v but not the...
View ArticleCobra 148 GTL
So I found a Cobra 148 GTL on Craigslist, it looks a little beat up but the guy only wantshows 50 bucks for it, I have a local shop that has been in business for quite a while. Should I pick up the...
View Article